1934 Plymouth Model PG Detailed Specifications

Detailed specifications, including tolerances and tune-up data are from [Chrysler 1934a] unless otherwise noted.

1. Axle, Front
   1. Wheel bearingsTaper-roller
   2. Toe in1/16" [NAPA 1937]
   3. Caster1° to 2.5°, preferred 2° [NAPA 1937]
   4. Camber1/4° to 3/4°, preferred 1/4° [NAPA 1937]
2. Battery
   1. Cells3
   2. Voltage6
   3. Specific Gravity
      1. Charged1.250
      2. Discharged1.150
3. Brake, HandExternal Contracting
   1. LocationRear of transmission
4. Brake, ServiceHydraulic Internal Expanding
5. CoolingPump
   1. Capacity14 quarts [SK 2002 27]
6. Engine
   1. Compression pressure95 PSI at cranking speed [SK 2002 27]
7. IgnitionBreaker Points
   1. Firing Order1-5-3-6-2-4
   2. Distributor[NAPA 1937]
      1. EarlyDelco Remy 622H
      2. LateDelco Remy 622U
   3. Breaker Points
      1. Breaker point gap0.020" [SK 2002 27]
      2. Cam Angle (Degrees)38° [Sk 2002 27]
      3. Points open9° flywheel travel or 0.0342" piston travel before top dead center
   4. Distributor Test Specifications[NAPA 1937]
      1. Delco Remy 622H
         1. Mechanical Advance9° at 1200 RPM.
         2. Contact spring tension19 to 23 oz.
      2. Delco Remy 622U
         1. Mechanical Advance10° at 1200 RPM.
         2. Contact spring tension19 to 23 oz.
   5. Spark plugs14 mm metric
      1. Original PlugsAC S9 [SK 2002 27]
      2. Gap0.025"
8. Lamps
   1. Head1110 [NAPA 1937]
   2. Park63 [NAPA 1937]
   3. Instrument63 [NAPA 1937]
   4. Dome81 [NAPA 1937]
   5. Stop and Tail1158 [NAPA 1937]
   6. Fuse(s)
      1. Back of Ammeter20 amp. [NAPA 1937]
      2. Dual Horn20 amp. (Next to starter) [NAPA 1937]
9. Lubrication, Engine
   1. Oil capacity5 quarts [SK 2002 27]
10. Valves
    1. Tappet clearance
       1. Hot engine
          1. Inlet0.005" [SK 2002 27]
          2. Exhaust0.007" [SK 2002 27]
       2. For valve timing
          1. Inlet0.011" [SK 2002 27]